home *** CD-ROM | disk | FTP | other *** search
- Path: nntp.teleport.com!usenet
- From: curt@teleport.com (Curt...)
- Newsgroups: comp.dcom.modems
- Subject: Re: sportster 28.8 int and dialtone
- Date: Mon, 12 Feb 1996 07:27:15 GMT
- Organization: Teleport - Portland's Public Access (503) 220-1016
- Message-ID: <30f2ca93.2677280@news.teleport.com>
- References: <4crv21$bk6@news.smart.net>
- NNTP-Posting-Host: ip-pdx14-21.teleport.com
- X-Newsreader: Forte Agent .99d/32.182
-
- wapembe@gallows (bill pemberton) wrote:
-
- > i am having a problem getting this modem to recognize a dial tone.
- > i have a sportster 28.8 (one of the new ones that should do 33.6)
- >
- > system configuration
- > com1, irq4 nothing attached
- > com2, irq3 mouse
- > com3, irq4 modem
-
- > i don't see why there should be a conflict with irq4
- > since i don't have anything installed on com1.
- > can someone shed some light on this, please?
-
- I assume from your message that the Sportster is an internal modem. If so,
- and you have not disabled Com1, the IRQ4 conflict may be causing the problem.
- Should be fairly simple to temporarily disable Com1 and see what happens.
- Also you may wish to try selecting a different IRQ on the modem (jumpers),
- and see if you can get that working.
-
- Good luck to you,
- Curt...
-
-
-
-
-
-
- _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
- Curt's High Speed Modem Page:
- http://www.teleport.com/~curt/modems.html
- _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
-